Geotechnical Investigation
- Subsurface soil and rock exploration through boreholes, trial pits, and core drilling
- Collection and classification of soil and rock samples (disturbed and undisturbed)
- Standard Penetration Test (SPT) and Cone Penetration Test (CPT)
- Field density test and plate load test for bearing capacity evaluation
- Groundwater level measurement and monitoring
- Laboratory testing of soil, rock, and water samples for physical and engineering properties
- Determination of soil bearing capacity and settlement analysis
- Evaluation of shear strength, compressibility, and permeability parameters
- Slope stability and earthwork design analysis
Tunnel Projects
- Expert geotechnical consultancy for tunnel design and construction.
- Comprehensive investigation and testing for safe and stable tunneling.
- Specialized in geological, geophysical, and geotechnical assessments.
- Ensuring compliance with national and international standards.
- Delivering reliable solutions for complex underground infrastructure projects.
Plate Load Test
- Conducted to determine the ultimate bearing capacity and settlement characteristics of soil or foundation strata
- Performed in accordance with IS 1888:1982 standards
- Suitable for shallow foundations, raft foundations, and isolated footings
- Involves loading a rigid steel plate of known size (typically 300 mm to 750 mm diameter) placed at the foundation level
- Incremental loading applied through hydraulic jack and measured with dial gauges
- Load–settlement curve plotted to determine safe bearing capacity
- Provides data for foundation design and ground improvement assessment
- Test can be carried out for natural ground, compacted fill, or engineered layers
Structural Stability Consultant
- Comprehensive structural stability assessment for all types of structures.
- Detailed analysis of load-bearing capacity and structural performance.
- Evaluation of cracks, distress, deformation, and structural defects.
- Consultancy for strengthening, retrofitting, and rehabilitation works.
- Compliance with IS codes, safety norms, and engineering best practices.
- Advanced investigation using NDT tests (Rebound Hammer, UPV, Core Cutting, etc.).
- Expert recommendations to enhance durability and long-term stability.
- Reliable consultancy support for buildings, bridges, tunnels, and industrial structures.
Field California Bearing Ratio Test
- Conducted to assess the strength and load-bearing capacity of subgrade soil for pavements, roads, and airfields
- Performed as per IS 2720 (Part XVI): 1987 standards
- Helps in designing flexible and rigid pavements based on in-situ soil conditions
- Involves penetration of a standard piston into the prepared soil surface under controlled loading
- Both soaked and unsoaked conditions are tested to simulate actual field conditions
- Provides CBR value (%), which is used to determine pavement layer thickness
- Quick and reliable method for site investigation of highways, runways, and industrial areas
- Field test complemented with laboratory CBR test for more accurate design parameters
Earth Resistivity Test
- Conducted to measure the resistivity of soil for designing safe and effective earthing/grounding systems
- Helps in ensuring electrical safety by minimizing touch and step voltage hazards
- Performed using four-probe (Wenner or Schlumberger) method for accurate readings
- Determines optimum earthing system design for substations, buildings, towers, and electrical installations
- Assesses soil resistivity variations with depth and moisture content
- Data used to calculate required number and depth of earth electrodes
- Supports design of lightning protection, grounding grids, and electrical safety systems
- Fast, reliable, and non-destructive testing method
Pile Load Tests
- Preparation of pile for pull-out testing
- Application of controlled vertical load to the pile
- Measurement of displacement and load during test
- Determination of ultimate uplift capacity of the pile
- Assessment of pile-soil interaction and bond strength
- Recommendations for foundation design based on test results
- Preparation of detailed test report with load-displacement curves
Concrete Mix Deign Laboratory Testing
-
- Carried out as per IS 10262:2019 and IS 456:2000 guidelines
- Determines the optimum proportions of cement, fine aggregate, coarse aggregate, and water to achieve desired strength and workability
- Ensures economical and durable concrete for various grades (e.g., M20, M25, M30, M40, etc.)
- Involves testing of materials for specific gravity, water absorption, sieve analysis, and moisture content
- Preparation and testing of trial mixes to verify target strength and workability
- Slump cone test conducted to check workability and consistency
- Compressive strength test on cubes at 7 and 28 days
- Suitable for residential, commercial, industrial, and infrastructure projects
- Carried out as per IS 10262:2019 and IS 456:2000 guidelines
Non Destructive Tests
- Performed to evaluate the quality, strength, and integrity of concrete structures without damaging them
- Conducted as per IS 13311 (Part 1 & 2):1992 and related Indian Standards
- Helps in assessing in-situ concrete strength, detecting voids, cracks, honeycombing, and corrosion
- Rebound Hammer Test – to assess surface hardness and estimate compressive strength
- Ultrasonic Pulse Velocity (UPV) Test – to check concrete uniformity and detect internal flaws
- Core Cutting & Testing – for direct compressive strength verification
- Half-Cell Potential Test – to evaluate corrosion potential in reinforcement
- Cover Meter Survey – to determine reinforcement cover and bar location
- Crack Depth Measurement and Rebar Detection
- Useful for structural audit, rehabilitation, and quality assurance of existing buildings and bridges
Surveying
- Comprehensive topographical, contour, and land surveys using advanced total stations, GPS, and drones
- Topographical Survey – mapping natural and man-made features with contour generation
- Contour Survey – for determining ground levels and slope for design and earthwork estimation
- Boundary & Layout Survey – marking of property limits, building layouts, and infrastructure alignments
- DGPS / GPS Survey – high-accuracy georeferenced data collection for mapping and planning
- Level Survey – using auto levels and digital levels for elevation and gradient assessment
- Preparation of AutoCAD drawings, contour maps, and digital terrain models (DTM)
- Reports and drawings provided in both digital and hard copy formats for easy integration into design works
Who We Are?About SoilGlobe
SoilGlobe Engineering Private Limited is a privately-owned geotechnical and building material testing firm dedicated to providing comprehensive testing solutions for civil engineering structures. Established in 2021, we have been delivering professional services with a focus on quality, accuracy, and timely results, contributing to the successful completion of numerous projects.
Know more0+
Projects Completed
0+
Years Of Experience
0+
Team Members
Recent Projects
Geotechnical Investigation & Consultancy for Uttarkhan Tunnel Project
Know More
Aurangabad Maharashtra Geotechnical Investigation & Soil Analysis for Foundation Design
Know More
Pile Compression Test Services in Geotechnical Investigations | Soil Globe
Know More
Field Testing for Construction of Medicine Plant – MIDC Bidkin, Aurangabad, Maharashtra
Know More
Geotechnical Investigation for Construction of Bio Gas Plant – Nagbhid, Chandrapur, Maharashtra
Know More
Underground Gas Pipeline – Chh. Sambhajinagar to Jalna Highway, Maharashtra (Geotechnical Investigation)
Know More
Delivering Excellence in Geostructural Solutions
Trusted Partner in Soil Testing & Geotechnical Services
At SoilGlobe Engineering Pvt Ltd, we specialize in providing accurate geotechnical investigations, and material analysis for civil engineering projects. With over 8 years of experience, our team ensures reliable results that meet international standards . From soil strength analysis to foundation design support, we are committed to delivering quality, precision, and valueto every project.
What Our Clients Say
Discover why our customers love our exceptional service
Arjun Mehta
Project Manager, Infrastructure Firm
"SoilGlobe Engineering Pvt. Ltd. provided us with comprehensive geotechnical investigations for our highway project. Their reports were highly detailed, accurate, and delivered on time, which helped us make critical design decisions with confidence."
More Review
Neha Sharma
Structural Engineer
"We regularly rely on SoilGlobe for soil and building material testing. Their state-of-the-art lab facilities and professional approach ensure consistent, reliable results. Their team always goes the extra mile to explain findings clearly."
More Review
Radhika Iyer
Contractor
"Working with SoilGlobe has been a smooth experience. Their pile load tests and material quality checks were carried out with precision. The professionalism and timely delivery of results make them a trusted partner for all our projects."
More Review
Sagar Deshmukh
Civil Consultant
"SoilGlobe Engineering’s expertise in geotechnical and material testing is exceptional. Their reports are thorough and easy to interpret, making them invaluable for design and execution phases of civil projects."
More Review
Some of Our Clients
